Buy now and Pay later!
HOME | SALES | SERVICE | PARTS | DIRECTIONS | HOURS | LINKS | CONTACT US
AMP 24
Ariens Electric Snow Blower Series
MSRP: $ 1,699.99
Knight's Inc. Sale Price: $ 1,499.99
Specifications
Model Number
916003
Engine Manufacturer
Ariens
Engine Power
48 Volt, 4 HP, 30A Battery, Brushless DC Motor
Chute Construction
Steel
Chute Deflector Control
Remote at Operator's Position
13 in. x 4 in.
Tire Type
Directional Snow Tread
Axle Type
Pin Lock
Battery Run Time
Up to 1 Hour for Light Snow.
Up to 45 Minutes for Heavy Snow
Drive Type
Disc Drive
Speeds
6 Forward, 2 Reverse
Gear Case Construction
Aluminum
Impeller
3-Blade Steel, 12 inch.
Auger
Serrated Steel, 11 inches
Skid Shoes
Reversible Steel
Length
51.9 inches
Width
26.4 inches
Height
44.3 inches
Weight
232 pounds
Warranty
Homeowner: 3 Years, 1 Year Battery
Commercial: 90 Days, 1 Year Battery
Headlights
No
Hand Warmers
Remote Deflector Control
Standard
Drift Cutters
Optional
Clean Out Tool
Features
Powered by two AMG Valve Regulated battery packs, the AMP 24 delivers clean and quiet power. No more tune-ups, no more gas, no more oil changes, no emissions, no hot mufflers to worry about when kids or pets are around, no carburetors, floats, chokes, or governors to set.
Batteries are stored in a corrosion resistant polymer battery box.
Take charge of the snow all from the comfort of the operator's position. Control the direction of the chute, the distance of your throw, and the speed that you move. Everything is simple, easy to use, and convenient.
Battery fully charges in 7 hours. When you're ready to use your snow blower, simply unplug the charger from the port, turn the key, and hit the switch. That's all you need to do to throw snow!
The Battery can last up to 1 hour for light snowfall and 45 minutes for heavy snowfall- all on a single charge. The battery indicator lets you know how much power you have until a re-charge. The indicator flashes red when you have 10 minutes of power left.
Included with the AMP 24 is a snow clean out tool. This handy tool clips onto the mount which is on the housing and lets you dig out wet and compacted snow that may build up inside the chute.
Available Accessories
These durable polyethylene composite skid shoes protect the fragile or decorative surfaces around your home. These reversible shoes won't leave paint behind, won't scratch, chip, dent or mark your driveway, walkway, and patio.
Replace your standard clean out tool with an updated tool that has a snow brush. Brush the snow off of your machine without harming the paint.
Store your Snow Blower on a rubber floor mat for extra protection during storage. Over time, moisture from concrete, asphalt, or wood floors slowly eat away at the snow blower's housing, scraper blade, and skid shoes.
Provides an extra layer of protection for your snow blower when it's not in use. It's waterproof, washable, and tear-resistant.
Spray this onto your snow blower to prevent snow from sticking to your snow blower and clogging the chute. This can be sprayed on shovels and other equipment as well.
For snowfalls over 20 inches, for wind-blown snow drifts, or for packed-in snow, these drift cutters cut tall and packed snow down and direct it straight into the auger. Installs on and off with no tools, just plastic wing nuts.
Protect your head, hands, face, and torso from heavy snow fall, cold winds, and snow blowback. It has extra room, a steel frame and good line of sight.
We proudly accept:
Copyright © 2010 | Knight's Incorporated |