The Briggs & Stratton 342 cc Polar Force Snow engine is designed for hard and heavy homeowner use, and all commercial applications. and has easy starting in harsh winters and snowstorms. It features a freeze-resistant recoil starter with a mitten grip handle for use with heavy gloves on, even for the coldest days.

A large, bright halogen headlight is built into the snow blower to provide light over a large area. Great for using your machine after dark or early in the morning.

It also protects you by helping other vehicles in the area to be aware of your presence.

The all steel chute construction is strong and durable - it has to be because you are going to be moving a lot of snow!

Specially designed, the reinforced and smoothed steel also helps to throw the snow more accurately and further than polymer, fiberglass, or plastic chutes. It's also the tallest chute in its class, meaning less snow blowback and more even snow distribution.

With an easy to use lever, you can move the snow chute 200 degrees, side to side, with just one finger. No more cranking levers!

All snow thrower controls are right there in front of you. You never have to move!

Control the auger, the snow blowers ground speed, the brakes, the chute rotation, the deflector control, and the hand warmers.

Keep your hands warm and toasty even on the coldest days and the most brutal snow storms. Both handles provide an amazing amount of heat and can be turned on or off with a switch.

The 16 inch, serrated auger digs up, chews up, and forces out compacted snow into the impeller and out the chute. The serrated blades also cuts through ice and crusted snow as if it were nothing.

The Pro series features a larger auger than the Deluxe and the Platinum series. Larger augers throw more snow, heavier snow, and more compacted snow even further.

The Cast Iron gear case provides extreme power to the augers, meaning more snow removal. Cast Iron is built to last for years and years of daily use even in the most extreme snowfalls.

Standard on all Ariens Pro series models. Great for snowfalls over 2 feet, for wind-blown snow drifts, or for packed-in snow, these drift cutters cut tall and packed snow down and direct it straight into the auger. Cutters fold down for storage and/or transportation.

Two large 16 inch x 6.5 inch directional snow tread tires provide exceptional tracking on all surfaces and virtually eliminate the need for tire chains.

With the automatic traction control, just start to turn your snow blower, and it turns for you! No levers to squeeze! Make a 180 degree turn in 1 second with little to no effort.

These commercially built skid shoes guide the snow blower along while protecting the surface. They are more thick and more durable than standard reversible skid shoes and last twice as long.

Included with the Pro 36 is a deluxe snow clean out tool. This handy tool clips onto the mount which is on the housing and lets you dig out wet and compacted snow that may build up inside the chute. The added brush also lets you brush the snow off of your machine without harming the paint.